Measures and Tips for Refilling Canon MX410 Refill

Apart from choosing a high-quality refill ink, users must matter the correct way of refilling. If you refill with unproper operation, the nozzle of your printer would get clogged sooner or later even if you buy the most advanced refill ink. To day, I will take Canon MX410 Refill for example to give you some detailed instruction about how to correctly refill the ink. Actually, refilling ink not only reduce the printing cost, but also do less harm to environment. This cost-effective measure has been widely used among printing industry, but there still exist some wrong way of operation.

In the first place, I will show you how to refill Canon MX410 Refill. Firstly, you should gently remove the label on the cartridge and let the refilling mouth bare in the air. Secondly, put the cartridge on the napkin with nozzle on the bottom. Thirdly, you have to wear a plastic glove and screw down the stopper of the refilling ink bottle, and be careful not to squeeze the bottle body. Fourthly, insert the injection of the refill ink bottle into the refilling mouth until reaching the sponge, then back for 2or 3mm. Fifthly, you can slowly squeeze the bottom of ink bottle, when the ink reaches to two-third capacity of the cartridge, please stop refilling. And finally, clean up the dropped out ink and labeled the label you have removed at first step.

Last but not least, there are some tips about how to perfectly refill the ink. Before you start to refill, you have to make sure that the cartridge is on good condition. If you feel a strong resistance while refilling Canon MX410 Refill, there must be something wrong with the cartridge. Besides, you’d better pay attention to the quantity when you refill. If excessive refilling, your printing equipment would get wet by dropped ink, and it will do much harm to your printer. In addition., don; t let the cartridge exposed in the air after finishing refilling, cause long time exposure would get the ink dry. All in all, you have to take your time, never get in a hurry during the process of refilling.